變送器BURKERT資料維護
8316 型緊湊型壓力測量設備，集機械強度、EMC特性和運行可靠性于一身。尤其適用于高要求的工業應用。由于不銹鋼不耐腐蝕性介質，可以使用 PVDF 過程接口。
設備的位置對測量精度沒有影響。
?將設備連接到固定電纜安裝。
?這些設備只能由合格的人員按照以下說明進行安裝，連接，設置和操作：
技術規格。
?安裝前，將過程數據與銘牌數據進行比較。
?被測介質必須適合壓力變送器與壓力傳感器接觸的部分。
中。
?紫外線輻射的影響可能導致材料變脆。 保護設備免受陽光直射。
When connecting up, installing and operating the device, the directives and laws of your country apply.
? The device is not used properly, serious bodily injury and/or considerable damage to property cannot be
excluded. This should be kept in mind particularly when the device was in use and is replaced.
? The transmitter is preset to the specific measuring range at the manufacturer’s plant. An additional setting
is not possible.
? The overload limit should be monitored and kept to at all times.
? The transmitter is maintenance-free.
? Connect the device to a low voltage power supply with safe separation (SELV).
? For equipment with a UL mark, they must be suppliedwith limited energy according to UL 61010-1 Second
Edition, Section 9.3 or LPS in conformance with UL 60950-1 or 2 in compliance with UL 1310 or
UL 1585.
8316型壓力變送器的應用前景
壓力變送器用于測量液體和氣體的相對和*壓力。
壓力變送器由帶膜片的壓阻測量單元組成，安裝在不銹鋼中
鋼外殼。 該變送器可提供各種連接器類型，IP保護標準以及
電流和電壓輸出。
變送器BURKERT資料維護
