簡單介紹德國寶德通用蒸汽電磁閥特征
上海乾拓貿易有限公司
企業QQ：2880626087
；
手機；（）
郵箱；@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號樓713室
with 3 m moulded cable Protection IP65 with cable plug, ATEX/IECEx junction box version and cable connection version NEMA 4x
with cable plug 2508 or 2509 only for stainless steel versions (other versions on request ) Weight AC 8W, DC 10W (300g); AC 18W,
電磁線圈采用耐化學腐蝕的環氧樹脂封裝。
可選滑環軸承以提高使用壽命。
? Servo-assisted and compact piston valve with diameter of up to DN12
用于過勵磁和降低功耗。
與 DIN EN 17301-803 A 型電纜插頭配套，
該閥的安全防護等級為 IP65，不銹鋼閥體式 NEMA 4X。
An optional sliding ring bearings increases the life cycle with dry gases.
Vibration-resistant , screwed coil system ? Increased leak-tightness with welded plunger guiding tube
Safe opening with hard-coupled piston system ? Explosion proof versions
The 6240 valve is a servo-assisted plunger valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance
采用固定耦合活塞系統，確保打開安全性
防爆式
The 6240 valve is a servo-assisted plunger valve.
The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness.
Various seal material combinations are available depending on the application.
High temperature version
伺服輔助式緊湊型活塞電磁閥閥，大通徑 DN 13
防震線圈
采用焊接鐵心導管，提高密封性能
The housing design and surface quality enable maximum flow rates. The coils are moulded with chemically resistant epoxy.
and leak-tightness. Various seal material combinations are available depending on the application.
DC 16W (800g) Installation As required, preferably with actuator upright
具有帶“kick and drop”電子線路式（2511插頭），
?Kick and Drop‘ electronics are available for over-excitation (plug 2511)
and reduced electrical power consumption in operation. In combination with a plug in accordance with DIN EN 17301-803 Form A,
the valves satisfy protection IP65. Stainless steel valves satisfy NEMA 4X.
其閥體結構和表面質量使該閥具有大的流量。
The housing design and surface quality enable maximum ? ow rates. The coils are moulded with chemically resistant epoxy.
An optional sliding ring bearings increases the life cycle with dry gases. ?Kick and Drop‘ electronics are available for over-excitation (plug 2511)
and reduced electrical power consumption in operation. In combination with a plug in accordance with DIN EN 17301-803 Form A,
the valves satisfy protection IP65. Stainless steel valves satisfy NEMA 4X.
伺服輔助式柱塞電磁閥，
止動器與柱塞導管焊接在一起，以提高耐壓性和密封性。
Neutral gases and liquids, such as e.g. compressed air, water, hydraulic oil Steam and hot medium Viscosity max. 21 mm2/sec
Medium temperature FKM PTFE/PEEK DN6 PTFE/PEEK DN12 EPDM
-10 °C to +140 °C -40 °C to +180 °C -40 °C to +140 °C -30 °C to +120 °C (on request) Ambient temperature max. 55 °C
Operating voltage 24 V DC, 24 V/50Hz, 230/50Hz (others on request) Voltage tolerance ±10% Duty cycle continuous rating Electrical connection Tag connector acc.
DIN EN 175 301-803 Form A for cable plug Type 2508 (see ordering chart for accessories) ATEX/IECEx version
根據不同的應用，可以選擇各種密封材質。
Technical data Port connections G 1/4, G 3/8, G 1/2 Ori? ce DN6.0, DN12.0 Body material Brass, Stainless steel Coil material
Epoxy Coil insulation Class H Seal material FKM, PTFE/FKM and PTFE/PEEK for high temperature and high pressure versions (EPDM on request) Medium
簡單介紹德國寶德通用蒸汽電磁閥特征
