銷售德國HYDAC單向節流閥，FLKS-340SL
上海乾拓貿易有限公司
：楊江玲
企業QQ：2880626083
手 機：（）
電 話：-8012
郵箱；@163.com
地址：上海市嘉定區江橋嘉涌路6號樓713室
es 21/19/16 to 18/16/13 may cause
immediate failure of the parts in the
HYDAC needle valves with reverse flow check are equipped with throttle spindle
and turning knob for influencing the flow rate by
z FPM: from -20°C to +120°C
different valves, but in average in the
range of 10 mm2 /s to 420 mm2/ s.
means of an adjustable cross-section in one direction.
There is free flow in the opposite direction. Fine adjustment of the flow rate by
means of specially formed throttle spindles; e.g.
for the velocity control of loaded consumers.
Filtration and the associated particle size
too thin or thick liquids, the assured
features can not be fulfilled. These
hydraulic system when these particles
are accumulated in critical areas
(solenoid valves - 20°C)
viscosities are also different for the
of contaminants in the hydraulic oil is
the most important point in the operation
HYDAC needle valves with reverse flow check are equipped with throttle spindle
and turning knob for influencing the flow rate by
z FPM: from -20°C to +120°C
(all other influences see point 4)
HYDAC valves may be used generally
only in specific viscosity ranges, as in
too thin or thick liquids, the assured
features can not be fulfilled. These
of a hydraulic system. Exceeding the
specified particle size in the filtration
(all other influences see point 4)
HYDAC valves may be used generally
only in specific viscosity ranges, as in
銷售德國HYDAC單向節流閥，FLKS-340SL
