控制器 TEACH-IN 按鍵 工作電壓 10 ... 30 V DC 接口類型 IO-Link ( via C/Q = pin 4 ) IO-Link Revision 1.1 Min. cycle time 3 ms Process data witdh Process data input 3 Byte
Measurement to , 100 mm detection range, red laser light,
laser 1, measured value via IO-Link, 2 x push-pull output, 2 m fixed cable
測量范圍 40 ... 100 mm
光源類型 激光二極管
光源類型 調制紅光
Laser nominal ratings
激光等級 1
波長 680 nm
光斑直徑 approx. 3 mm at a distance of 100 mm
constantly on - switch output active
constantly off - switch output inactive
Process data output 2 Bit
Compatible master port type A
輸出開關類型 The default setting is:
C/Q - BK: NPN normally open, PNP normally closed, IO-Link
Q2 - WH: NPN normally open, PNP normally closed
信號輸出 2推挽(4 in 1)輸出,短路保護,反極性保護,過電壓保護
使用類別 DC-12 and DC-13
與標準和規范體系的一致性
指令符合
EMC 指示 2004/108/EC EN 60947-5-2:2007+A1:2012
符合標準
產品標準 EN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Measurement accuracy
Warm up time 5 min
線性誤差 ± 0,75 %
FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.
11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
防護等級 IP67 / IP69 / IP69K
連接器 2m電纜
外殼 聚碳酸酯(Polycarbonate)