威格勒溫度傳感器，WENGLOR溫度傳感器特性
企業QQ：2880626087
；
手機；（）
郵箱；@163.com
；周彩云
地址：上海市嘉定區江橋嘉涌路99弄6號713室
OptoTemp非接觸測量溫度傳感器用于確定由物體釋放的紅外輻射量并因此確定物體的溫度。
測量可以快速、非接觸進行且無反作用。
Built-in laser correction aids and can set the
infrared radiation released by the
and thus determine the temperature of the .
Sensors can be used for different applications (rated or absolute).
The OptoTemp sensor is measured with a sensitivity
of 8 ... 14 microns in the measurement range of -25 ... 350 ° C.
傳感器可用于不同的應用（額定值比對或值測量）。
Regardless of material, size and equipment status,
Can be stable to measure the temperature of different s.
物體本身不會受到影響。
無論材質、大小和設備狀態，
thermal radiation coefficient can easily speed up the debugging.
Monitor the process temperature
Production line warranty
er and carton production
OptoTemp傳感器以8...14 微米的靈敏度在-25...350 °C的測量范圍內測量。
測量值在內置顯示屏上顯示并通過輸出端或RS-232接口輸出。
由于采用兩個開關輸出端和模擬輸出點，
Measurements can be carried out quickly, non-contact and no reaction.
The itself will not be affected.
都能穩定測量不同物體的溫度。
Measured values are displayed on the built-in display and output via the output or RS-232 interface.
As a result of the use of two switch output and analog output points,
威格勒溫度傳感器，WENGLOR溫度傳感器特性
