NACHI方向控制閥技術數據,進口不二越方向控制閥
C The mounting direction of the tie rod is d on the lid of the drawbars
Of the orientation, can be 90 degrees for the amplitude to any orientation.
e制動爪型(F型、E型)
在閥芯的3位置點或者2位置點掛
擋后,馬上停止運轉。
VPT connected type DMA-G01 ? G03- * 7 * -
(J) 20 is closed with cross-DMA-G01 ?
G03- * 7X- (J) 20 as a reference.
B The relationship between the lever switch position and the JIS mark is as follows:
(Please refer to the following installation drawings for the N I and NII labels.)
w彈簧中立型(C型)
閥芯經常位于中立位置,切換到
兩端位置后,如放開拉桿,則被
彈簧拉回中間位置。
拉桿的操作方法,有以下3種:
q彈簧切換安裝型(A型)
拉桿常常在底部位置,由彈簧拉
動進行切換。放開后,拉桿又恢
復到原來的位置。
E Brake claw type (type F, type E)
In the spool of the 3-point or 2-point hanging
After the block, immediately stop running.
x壓力損失與SA-G01 ? G03相同,所
以可參照SA-G01 ? G03的說明。
c拉桿的安裝方向根據拉桿邊的蓋子
的朝向而定,能以90度為幅度轉向任意朝向。
vPT接通型DMA-G01 ? G03-*7*-
(J)20是以閉合型交叉DMA-G01 ?