HAWE截止式換向閥特點,哈威截止式換向閥價格
這種換向閥可絕無泄漏地直接控制執行元件及作為先導閥用于其它液壓系統的控制（先導式控制）。
此種閥為彈簧加載球式截止結構并由角度杠桿和推桿克服彈簧壓力和液體壓力進行換向。
This reversing valve can control the actuator and control (pilot control)
as a pilot valve for other hydraulic systems without any leakage.
The valve is a spring-loaded ball-type cut-off structure and is reversed by
the angle lever and the push rod against the spring pressure and the liquid pressure.
The filter installed on the inlet port can prevent the intrusion of large impurities.
故該閥換向平穩,無沖擊現象.為了避免不利的影響,
絕大多數的換向閥均可組裝插裝式單向閥與準背壓閥或在進油口組裝插裝式節流閥.
在管接式單只閥的底板可集成旁通單向閥及橋式回路形式的單向閥.
After the flat grinding plate on the oil are equipped with O-ring.
For the pipe connection can make their own floor or valve block
(one-way valve with the bottom plate see section 5 and D7302 samples of the group valve block)
The valve sealing performance is excellent, no internal leakage.
對于管式連接可自己制作底板或閥塊(單向閥用的底板見第5節及按D7302樣本的成組閥塊)
該閥密封性能極好,絕無內泄漏.既使高壓下工作,閥芯也不會卡死,
而且動作十分可靠.由于杠桿與操縱力之間具有的比率,
Even under high pressure work, the spool will not be stuck,
And the action is very reliable.As the lever and the steering force between the very good ratio,
So the valve for a smooth, no impact phenomenon.In order to avoid adverse effects,
The vast majority of the valve can be assembled cartridge
HAWE截止式換向閥特點,哈威截止式換向閥價格
